Answers

We have an 11 Point Jobsite Cleanup Roster that all of our employees need to sign when they become employed by us. It lets them know of the expectation prior to starting work. It also holds them accountable if they do not cleanup the job site as required. We are very conscience of running a proffessional company, not only administratively but in all areas including production.

We always clean up after the job every day. If you leave things go then they build up over time and make a bigger mess. Carpet runners, plastic covering doors, and setting expectations for your employees/subcontractors is a must.

No.  I don't think that is a good idera.  You are not going to be happy with result.  Hold off spending money doing what you are recommending until you have money to do it the right way.

Philip Anderson

HDR Remodeling Berkeley ca

It can be done but results won't be as good as countertops build in the shop and installed after it. 

Many factors involved to consider. What laminate surface you have on existing countertops, do you have seems, what tipe of backsplash you have and tipe of edge on your countertop. 

After all, my suggestion would be. Add another 30% and get new countertops made right way. Or add another 50% and get lover grade solid granite countertops what brings you much better value. Consider that in any case you will have to remove and reinstall faucet and sink. That is addittional expence that many people dont realize to include in to their budget.

Good luck.

Manny Stiega.

Da Vinci Cabinetry LLC.

Unfortunately, no, applying another layer of laminate is not a viable option. Most homeowners do not have the proper tool to adequately heat the surface to adhere the laminate, as the adhesive typically used is heat activated as well as time cured. In addition, the pre-existing laminate will prove to be too smooth for the adhesive to bond well, and will likely lead to the new laminate peeling after a short time.

That being said, however, there are several options for a new countertop, which are designed to "sit" on top of the pre-existing countertop and wrap over the front of the old. They usually add approximately 1/2 to 3/4 inch to the height and overall depth of the counter while not actually increasing the counter space available for use. I would suggest hiring a professional for the installation, though a handy homeowner could do it themselves. The fact that they are lighter than their standard solid counter top counterparts, and won't require much new framing or shoring of old structures, makes these more inexpensive than a brand new countertop. They also come in many materials, making it possible to have the look of a quartz, solid surface or other countertop, without all of the expense.

John H.

Biehl Brothers Contracting LLC.