Answers

There are companies that offer energy evaluations and some even use thermal imaging and a tool / process called a blower door reading / test.  This will help identify the cause and opportunities for correction.  You can do some easy items as well like ensuring all like plate covers have insulated pads behind the covers, check for insulation around your homes perimeter if you have an unfinished basement, check your homes exterior for small gaps or holes left from old utilities and service work performed over the years.  Best of luck!

The glass package and the insulation of the window are the most important. The best window would be quadriple or triple pane window with foamfilled sashes and krypton or argon gas inbetween the glass. The dense gas keeps the cold air out in the winter and the hot air out in the summer. The foam filled sashes keep the insulation like your walls. Also choose vinyl over wood for better insulation, 

the most important thing you need to make sure you have is a highly rated low-e window. low -e will reflect the solar rays away from the inside of your home so it doesn't heat up during the summer or direct sun etc and during the winter it works in the opposite manor. winter it will keep the heat inside your home keeping your house comfortable. there are many good brands of windows like Andersen, Western, Hurd, Marvin, Eagle (andersen), just to make a few. be sure and do plenty of research and get estimates from. 4-5 companies and compare dont just get estimates from 1 or 2 companies. good luck. 

A good way to add value to your house is to do home improvement. Many renovation and home additions add value to the house. Also, painting by interior painting San Jose is a good way to add value to the house. One of the simplest and most cost-effective improvement is house painting. Low-maintenance landscaping also adds value when you sell your house.

Adding the stylish furniture in home can be very effective in increasing the home vlaue. 

Based on the information found via the internet, I believe the difference in siding materials depends a lot on where you live and what kind of climate you experience year round for your location. I'm including a link here that shows what one inventive father did with his children to promote education in understanding their climate of California. It's a very good way of finding out the semantics of a product while spending quality time bonding with your children. Best of all, he's done the difficult work of figuring out which materials stand up to severe climate changes for you!

http://www.3ghomeimprovements.com/2017/06/james-hardie-fiber-cement-vs-lp-smartside-vs-insulated-vinyl-siding/

Installing ductless system is the best way to cool down a hot room. An HVAC system is mainly designed for providing and maintaining thermal comfort and maintaining indoor air quality. Refer to ductless AC installation NJ professionals to help you choose the best equipment to make your home a comfortable place to live in.

Hardi™ is a fibre-cement product and the LP product is a chip-board/resin composite. The Hardi™ comes both finished and unfinished, the LP is unfinished and must be painted with a high quality exterior coating that meets the demands and longevity requirements of the region in which it is utilized. Finished Product warranties vary based on the above variables.

LP is a woodbased product, where Hardi Plank is a fiber cement. They ar both very similar in cost here in the midwest. LP Smartsiding if fairly new the market as well. 

Pamela, there are a lot of window replacement options on the market. It's important to have a window which is designed for your region in the U.S. here is a chart by energy star which contains this info: https://www.energystar.gov/products/building_products/residential_windows_doors_and_skylights/key_product_criteria

If one is in your area, see if a local business manufactures windows tailored for your portion of the U.S. Avoid builder grade replacements, and try to work with companies which have been in business for 30+ years who can stand behind the warranties they provide. Always read the fine print, and make sure a remodeler will warranty the installation.

You might want to look into AB2299 for the state of California. Add additional living area and raise the value 160k-400K to all R1 Properties. We build these for a living and are seeing a 2% return rate on your investment.

Hi Pamela,

There are many great door & window product lines to choose from.  The most important consideration is the glass package and style.  I recommend consulting with a few glass companies and door/window contractors to help with the decision.  You need to choose your doors and windows based on location - cliamate zone.  Marvin is top of the line, but it is extremely expensive, just like Renewal by Andersen.  I recommend looking at Milgard, Jeld-Win and Andersen (not Renewal).  Good Luck! 

Gregg

Murray Lampert Design, Build, Remodel

www.murraylampert.com

Fiberglass windows would be a great option for energy efficency. We sell the Infinity by Marvin windows which are amazing!

Direct added value to your home:

Finish out unfinished living areas

Upgrades to bathroom and kitchen

Add additional living area

All other items completed to home have negligible value added benifits in terms of Apprasial added value.